Specs & OE references — 12V DC, 4 male blade terminals, female connector, plastic cover; micro relay form factor. Reference OE numbers: 13468934, 13306941, 19119212. Use for accessory power/PCM/defogger depending on vehicle. Compare pin layout and fuse-block position before install.
Operation & location — Low-current control switches high-current load; typically installed in the engine-compartment/main fuse-relay block (and on some platforms the interior fuse/relay block). Many listings denote “4-TERM MINI, from block assembly.” Symptoms of a failed relay can include no-crank or inoperative defogger/horn/fog lamps (circuit-dependent).
GMC (year-by-year) — Compatible with 2016 GMC Yukon [Fuse Block] Relay; 2016 Yukon XL [Fuse Block]. (Additional GMC platforms may apply; verify by comparing part number and fuse-block location.)
Helpful complements (cross-sell) — Often serviced together during power-distribution repairs: multi-use fuse OE 13586653; relays OE 13500113, 13500126; relay assembly OE 13422668. These are complementary items and not required for every repair.
Description
What it is: A 12V, 4-pin micro relay that switches high current loads from a low current control signal. Designed for power-distribution tasks such as accessory power, PCM enable, or rear defogger control (varies by platform).
OE reference numbers: 13468934; replaces 13306941, 19119212.
Electrical: 12V DC; 4 male blade terminals; female connector; plastic cover.
Form factor: Micro relay with blade terminals; check cavity and pin layout before install.
Typical location: Engine-compartment/main fuse-relay block (some platforms use the interior fuse/relay block).
Common symptoms of a faulty relay: No-start/no-crank, inoperative rear window defogger, horn, or fog lamp—depending on the circuit controlled.
Compatibility: Fits many GM platforms across Buick, Cadillac, Chevrolet, and GMC from 2011–2024. See the bullets for year-by-year coverage and verify by part number and fuse-block position.
Notes: Always match the cavity and pinout in the fuse block. If your vehicle uses a different amp rating or pin configuration, this relay will not apply.