Set of 2 reproduction dust seals for the models listed below. The old dust boots become stiff and start to crack over time, keep dirt and water off your fork seals with a fresh pair of boots! If you're replacing the fork seals, that's a perfect time to replace the dust boots.
Replacement for Honda Part Number: 91254-434-003
Top Opening ID: 34mm (1.3")
Bottom Opening ID: 43.6mm (1.7")
Overall OD: 52mm (2")
Overall Height: 15mm (.58")
CRM50R - 1993-1996 - European Model
CRM75R - 1989-1994 - European Model
CR80R - 1987-1995
CR125M Elsinore - 1977-1978
NSR125R - 1993-2001 - European Model
VT125 Shadow - 1999-2007 - European Model
XL125 Varadero - 2001-2015 - European Model
XR200R - 1981-1983
ATC250R - 1983-1984
VTR250 Interceptor - 1988-1990
XL250R - 1982-1983
XR250 - 1979-1980
NSS300A - 2014-2016
ATC350X - 1985-1986
CX500C Custom - 1981-1982
GB500 Tourist Trophy - 1989-1990
GL500 Silver Wing - 1981-1982
GL500I Silver Wing Interstate - 1981-1982
XR500 - 1979-1980
CB650 - 1979-1982
CB650C Custom - 1980-1981
CB750C Custom - 1981-1982
CB750F Super Sport - 1977-1980
CB750K Four - 1979-1982
CB750L Limited Edition - 1979
CBX Super Sport - 1979-1980