Genuine Honda fork seal. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals or use the old seal to help drive in the new seal. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed.
Dimensions: 35X48X11 (mm)
Honda part number: 91255-KBH-003
Note: CB450K3-K4 - 1970-1971 Honda made a change in the fork seal size. Check the sizing stamped on your seals prior to ordering.
This seal will not replace: OIL SEAL (35X46X11) | Which was used from Frame SN 4017272
Fits Honda: MT250 - 1975-1976
XL250K - 1972-1975
XL350 - 1975-1978
CB450K - 1970-1974
CL450K - 1972-1974
CB500K - 1971-1973
CB500T Twin - 1975-1976
CX500C - 1981-1982
GL500 - 1981-1982
CB550F Super Sport - 1975-1977
CB550K - 1974-1978
CB650 - 1979-1980
CB650C - 1980
CB750A Automatic - 1976-1978
CB750F Super Sport - 1975-1980
CB750K - 1970-1982
CBX - 1979-1980