Force Performance is the leading source for transmission crossmembers. Whether you're looking for an upgrade from stock components or crossmember parts to fit all your drivetrain needs and provides clearance for aftermarket large diameter dual exhaust systems. Finished in a black powder coat and includes new mounting hardware. Note: The distance between the crossbar frame holes is approximately 30-3/8 inches. Measure your frame or rail to ensure proper selection. Mounting hardware included. This crossmember is installed with the GForce label facing the rear of the vehicle. A second determining feature is that the center tube section of the cross member has a 1/2" in. drain hole located at the bottom and on the PASSENGER side next to the exhaust hump weld. To use 7/16 hardware provided, it is necessary to enlarge the holes in the frame rails. If the installer chooses to use the 3/8 size hardware, it is highly recommended that the installer obtain grade 8 fasteners and washers to compensate.