Burco Redi-Heat™ grids are peel and stick-on heating elements that can be used to provide heating functionalities to mirrors with or without existing heating capabilities.

Redi-Heat™ grids are recommended for use with Burco Redi Cuts® mirror replacements only and may require professional installation, backing plate modification, and additional wiring.

If your vehicles contained a heating element from the factory you do not need any additional wiring. This heat grid contains 2, 4.8mm terminals. This would need to be measured prior to ensure the correct connection is used. Adaptors can be used if the terminals are the wrong size.

12V power supply required
Terminals and heat grid included
Peel and stick application
Additional wiring may be required
Professional install recommended
For use with Burco Redi Cuts® only