Installation tutorial
1. Switch and wires already welded together, charging wire and pine are assembled. But plastic body for wire end Not connect.
2. Pre-install a nut on the switch.
3. Insert the charging wire into the hole of CNC switch body.
4. Install plastic body at wire end.
5. Insert plastic body for wire end into the CNC switch body and fix it with screw at side.
Note: Do Not turn the screw in too much in order Not to break the plastic body for wire end. Just fix the plastic body at the position is OK.
6. Install the round washer with a tab on single switch top round part, then insert it into the hole in CNC switch body. Then install a elastic washer and lock nut.
7.It's finished.
Item specifics:
For vehicle type: Airplanes
Material: Composite Material
Origin: Mainland China
Recommend age: 12+y
Use: Vehicles & Remote Control Toys