Easy DIY, without modification
LED bulb warning error decoder is used for fog light, headlight, daytime running lights , etc.
This is a load resistor for led/Surface Mount Device bulbs to correct error code or fast blinking issues related to the low current draw when using LED bulbs in place of halogen bulbs.
The load resistor would increase the current draw to a level such that the car would not detect error.
Note:
The load resistor on the bypass wiring is very hot, please mount it to the metal.
Please make sure the power is OFF during installation.
Decoder must be fixed on a wellventilated iron frame. And do not let the decoder contact with plastic / rubber and other parts, to avoid melting.
Package Included:
2 x Car LED Decoder