Owners spend millions of dollars annually addressing the consequences of pump failure. Failures in residential pumps such as sump pumps can result in costly equipment repair or replacement, as well as extensive building water damage due to flooding. The best way to prevent pump failure is to constantly monitor your power consumption.

PumpFuse is a power monitor and pump protection device that works with all types of sump pumps and utility pumps, without the need for water level sensors.

How does it work
PumpFuse monitors small variations in your pump's power usage and notifies you when it goes over or under the preset thresholds. Issues such as a faulty float switch can lead to your pump running constantly and the pump's built-in thermal protector can make it cycle on and off repeatedly. PumpFuse adds to your existing setup and can therefore prevent the on/off thermal cycling, alerting you about the need to perform preventative maintenance such as replacing a float switch or pump cleaning to address scale or inlet clogging with dirt.

Detect load loss
- Dry running
- Defective float switch
- Pump air-locked

Detect overloads
- Clogged or damaged impeller
- Check valve stuck, closed or improperly installed
- Discharge tube blocked
- Defective bearings

The mobile application
The PumpFuse mobile app works like a true Wi-Fi sump pump monitor, detecting failures by measuring the power the pump uses and sending malfunction alerts.

You also get extra dry pump protection with the remote reset feature.