Search

Search

Home / uxcell / Passive Components
-11%
uxcell 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft 10pcs in Saudi Arabia uxcell 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft 10pcs in Saudi Arabia uxcell 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft 10pcs in Saudi Arabia uxcell 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft 10pcs in Saudi Arabia uxcell 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft 10pcs in Saudi Arabia uxcell 360 Degree Rotary Encoder Code Switch Digital Potentiometer EC11 7 Pins 15mm Shaft 10pcs in Saudi Arabia

2

SAR 57
SAR 64
Brand
uxcell
Number of Items2
– 1 +

Special Features

  • Type: Encoder code with Switch; Adjustment method: 360 Degree; Number of digits: 20 digits; Pin Numbers: 7(5 working signal pins & 2 mounting pins); Rated Voltage: 5 Volt.
  • Shaft Diameter: 6mm/0.24"; Shaft Height: 15mm/0.59"; Thread Diameter: 6.8mm/0.27"; Total Dimension: 15mm x 12.5mm x 25mm / 0.59" x 0.49" x 1"(L*W*H).
  • In the forward rotation, the A line phase leads the B line phase; when reversed, the B line phase leads the A line phase. The phase relationship and number of rotations of AB can be identified using a simple digital logic circuit (exclusive OR gate and D flip-flop).
  • By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0.
  • Applications: Industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers.

Description

Description:
A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the angular position or motion of a shaft or axle to digital output signals.
Rotary encoders are used in a wide range of applications that require monitoring or control, or both, of mechanical systems, including industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers.

Specifications:
Adjustment method: 360 Degree
Pin Numbers: 7
Number of digits: 20 digits
Rated Voltage: 5 Volt
Shaft Diameter: 6mm/0.24"
Shaft Height: 15mm/0.59"
Thread Diameter: 6.8mm/0.27"
Total Dimension: 15mm x 12.5mm x 25mm / 0.59" x 0.49" x 1"(L*W*H)

Note:
Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases.
Do not touch the product with water, as this may cause abnormal output waveform.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}