Finally — a Tail Tidy Made for the 2025+ DR-Z4S / DR-Z4SM

The new Suzuki DR-Z4S and DR-Z4SM don't share the same rear mounting pattern as the old DR-Z400, which is why most “DRZ tail tidies” won't line up. The Skunk Prints Tail Tidy Fender Eliminator is modeled specifically around the 2025+ DR-Z4 rear end, so it bolts up cleanly with your factory hardware and keeps the plate tucked, solid, and trail-ready.

Uses Your OEM Bolts & Bushings
No guessing, no drilling weird holes, no rattly universal brackets. This kit is designed to reuse the stock bolts and isolation bushings so you get vibration control and an install that actually looks factory.

Flexible, Trail-Safe Design
Unlike stamped metal brackets that bend and stay bent, this kit is 3D printed from a flexible, impact-friendly polymer. It's rigid enough to hold the plate, but forgiving enough to take trail roost, luggage straps, or a tip-over without turning into a pretzel.

3D Printed by Riders
Printed on pro-grade machines, tuned for moto parts, and tested on real DR-Zs — not just on a desk. Matte black finish blends with the rear plastics and won't rust, chip, or ring like metal.

Lifetime Break-It-Replace-It Warranty
If you manage to break it, send us a photo and cover shipping — we'll send a replacement. We ride these bikes too, so we build parts we can stand behind.

Key Specs:
Fitment: 2025+ Suzuki DR-Z4S / DR-Z4SM (not DR-Z400)
Construction: 3D printed, flexible/impact-tolerant polymer
Install: Reuses factory bolts and isolation bushings
Finish: Matte black, dual-sport friendly
Warranty: Lifetime Break-It-Replace-It
Made by: Skunk Prints (rider-owned)

Built for riders who actually drop their bikes.
Built by Skunk Prints.

Updated Bullet Points
Made for the new DR-Z4: Precisely designed for the 2025+ Suzuki DR-Z4S and DR-Z4SM rear bolt pattern — older DR-Z400 eliminators won't fit this bike.
OEM-style install: Reuses your stock bolts and isolation bushings for a tight, rattle-free, vibration-dampened mount. No drilling or trimming.
Flexible, 3D-printed construction: Printed from a durable, impact-tolerant polymer that can flex instead of staying bent like thin stamped metal brackets.
Trail and supermoto ready: Lightweight, corrosion-proof, and designed for dual-sport use — won't rust, won't ring, and won't look cheap.
Lifetime Break-It-Replace-It warranty: If it breaks, send a photo and cover shipping — we'll replace it. Rider-owned. Made by Skunk Prints.