The Fujif camera shutter release cable allows you to control the shutter for clearer and less shaky photos. It is located on the right side of the camera (above the memory card/SD/TF card), with the letters "REMOTE" printed on it for the fast shutter of Fujifilm. 1) Supported functions:Photos, focusing/measurements 2) Applicable camera models: Fujifi-GFX100, GFX100S, GFX50SII, GFX50S, GFX50R, X-H2S, X-H2SII, X-H2, XT5, XT1, XT2, XT3, XT4, XT20, XT30, XT30II, XE1, XE2, XE2S, XE3, XH1, X100V, X100F, X100T, X-T100, X100F, XA1, XA3, XA5, XA7, XA10, XA20, X30, X70, XQ1, XQ2, X-PR02, FinePix S1I, GFX100S, GFX50S/50R, X-H2S, X-H2, XT5, XT2, XT3, XT4, XT20, XT30, XT30II, XE1, XE2, XE2S, XA3, XE3, XA5, XH1, X100V, X100T, X-T100 (The socket is located on the right (above the memory card)) 3) When the Fujif camera is set to video mode, you can control the video 4) Note: These Fujifi cameras need to enter the camera menu, in the "Microphone/Remote Control" item, select "Remote Control" to control the shutter release function (XT20, XT30, XE1, XE2, XE3, XA10 are applicable to the application camera. 2.5mm microphone interface) 5) Usage method: Insert the 2.5mm plug into the camera. Press the shutter quickly (REMOTE interface/2.5mm microphone interface) 6) Length: 150 cm / 59 inches, outer diameter 3.0 mm. Weight: 30 grams 7) This is a regular shutter release remote control, with the same function as the shutter button on the camera 8) Does not support "BULU" locking function, cannot achieve continuous pressing to achieve continuous/"BULU" effect. Specification: 1) Product size: Approximately 4 cm * 2 cm * 1 cm 2) No battery required, powered by the camera's power supply 3) Function is equivalent to the shutter button on the camera body 4) Uses an electronic button, allowing you to feel the clarity of the photo.