The FlipToggle is the only single-strap design that takes the guesswork out of hollow-wall anchoring. Its unique design securely holds the toggle for easy insertion into the pre-drilled hole. Once inserted, the spring tab flips the toggle into the right position so that when the collar is tightened the anchor is ready for the bolt. No jammed toggles, broken straps or misaligned bolts. Key Features: Installs into drywall and hollow CMU up to 2 1/8" thick with a 2 1/2" bolt. Bolt size: 3/16"-24 thread. Simple one-strap design holds toggle perfectly aligned for easy bolt insertion The collar ensures centered bolt placement in the hole and does not embed the bolt into the drywall, eliminating the potential for sagging fixtures. Installation: FlipToggle installs in four easy steps: Fold, insert, flip and tighten -- it's that quick!

The Anchor requires a 1/2" hole and a 10-24 screw (included 2-1/2" long)

Specifications

SAFE WORKING LOADS 2:1**

Ultimate Tensile and Shear Strength Values
1/2" Drywall - Ultimate Tension 67 lb (38 kg), Ultimate Strength 106 lb (57 kg)5/8" Drywall - Ultimate Tension 107 lb (52 kg), Ultimate Strength 188 lb (74 kg)Hollow Concrete Block - Ultimate Tension 415 lb (203 kg), Ultimate Strength 435 lb (204 kg)
** Loads may vary according to the quality of the drywall or concrete hollow block.

Warning: Use one-half or less of listed maximum values for safe working loads (as required by local regulations).

What's in the Box?(10) Flip toggle anchors(10) 3/16"-24 UNC bolts Environmental conditions: Indoor, dry conditions Material composition: Polypropylene, Steel, zinc-plated, Plastic