Floating Tapping Chuck Holder Straight Shank Telescopic Tap Collet Toolholder for M2 M16 Taps (Genericnp7md3g6gs-11)
ModelGenericnp7md3g6gs-11
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
- The tapping tool holder can be floated and retracted, the front can 5mm, and the rear can 6mm.
- Made of 20CrMrTi steel, fully carburized and heat treated to enhance wear and stability.
- The tapping tool holder is quenched and hardened, with high concentricity and good processing effect.
- When processing threads, the tapping tool holder can be extended and contracted, which can effectively the taps.
- The chuck is ER20, and the applicable tap is M2‑M16, which is often used for tapping on CNC lathes.
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
for 9" & Light 10" Cross Slide Feed South Bend Lathe Brass
SAR 105
2 Pack Masmoc 4" Metal Handwheel Fit 1/2" Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle
SAR 68
Ammco 2002, 3000, 3850, 3860, 4000, 4100, 7000, 7500, 7700 Brake Lathe 1" Arbor Replacement Nut
SAR 144
New Clamp Type Lathe Knurling Tools II 3/8" Sq x Long 5-3/4" Inch Tail II Capacity 3-25 mm
SAR 146
