Fitment – extended same-family appearances: Fits Versa 2007-2014, Cube 2009-2014, Juke 2011-2014 in trims using the same 4-way O2 connector family. Due to market/engine differences, always verify the 4-pin layout, latch direction, and secondary-lock style against your original connector.
Broader usage with the same 4-way O2 plug — Also seen on Versa (2007-2014), Cube Z12 (2009-2014), Juke F15 (2011-2014) when equipped with the matching 4-pin O2 sensor connector family. Always compare the keyway/locator and latch.
Interchange / replacement numbers — Connector housing 174257-2 (also written 0-174257-2). Secondary lock 174258. Typical terminal system: 1.8 mm (“070”) female; common cavity plug used on this family is 7160-9465. These references help verify tooling and service kits.
Wire Harness Length:6inch
Mates to O2 sensor assemblies (examples) — This connector mates to O2 sensor leads commonly coded with prefixes 22690-** / 22693-**** / 226A0-****** on Nissan small platforms; typical examples include 22690-ED000, 22690-ET000, 22690-CJ00A, 226A0-EN21A (application varies by engine/position). Confirm upstream vs downstream.
Install notes / QA — 4-position receptacle with yellow secondary lock; ensure terminals are fully seated and the lock engaged. Compare the orientation notch and latch tab to your original part. If your vehicle is diesel or uses a different keyway, this pigtail will not fit.