Allows you set the temperature you want the cooling fan to operate between 0℃~120℃
Suitable for use with any after-market Cooling Fan with 12V
The Fan will kick in at the selected temperature and then switch of when the engine temperature goes back down
To fit in the hose simply the top radiator and fully insert the probe, then re-fit hose and tighten over the capillary wire being extra careful not to damage the probe inside. Silic sealant can be used to help seal if required.
All of our products are subject to strict quality control. condition: New.
Description
Specification:
Voltage: 12V
Material: Steel and Plastic
Tempeure range: 0℃~120℃
Accuracy: 4±2℃
Tempeure bar length: 104mm
Tempeure sensing rod diameter: 5mm
Capillary length: 1000mm
Wiring Instructions
C Terminal = 12v Feed
No2 Terminal= Power out to the fan
(the switch is earthed through the fan)
No1 Terminal= Leave blank, this is not required for this application
You can also wire a relay in if you wish, but this is not a requirement.