Improve traction and control axle wrap of your ride without limiting wheel travel with a heavy wall constructed and internal compression springs by installing a BDS Recoil Traction Bar Mounting Kit compatible with Ford F350 Super Duty 4WD 2017-2026 (with 4.5 inch backspacech diameter axle) without limiting wheel travel with a BDS Recoil Traction Bar Mounting Kit, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. Full float design for bind-free performance and can be installed with a range of lift heights.

Fabricated from 2-inch OD x 3/16-inch wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1-1/4-nch x 12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings.

IMPORTANT: Does not fit regular cab models This kit fits trucks with 4.5" axle tube diameters including dually models