1. Quick Reading: The USB interface is used for plug and play, with a wire length of approximately 1.4 meters. The interface cable is wrapped in PVC material for durability and higher transmission efficiency.
2. Fast in Response: Fast non card reading, reading speed is as quick as 0.2 seconds, reading and writing distance up to 8cm, card reading interval 0.2 seconds, supporting IC card reading and writing.
3. of Driver: Durability-Optimized and strong compatibility, using microelectronic RF modules, for , for LIUNX, for Android and other systems plug and play, without the need to install driver software.
4. Good Stability: Equipped with sponge pads on all four sides at the bottom, anti slip and wear sponge pads with detachable screws inside.
5. Fine PVC Casing: Exquisite craftsmanship, scratch and durable Cover made of PVC material, with a durable surface frosted and spray , exquisite craftsmanship.
Specification:
Item Type: IC Card Reader
Model: R20C-USB
Reading Speed: 0.2S
Card Reading Distance: Approx. 0 ~ 80mm / 0 ~ 3.15in
Card Reading Spacing: 0.5S
Communication Interface: USB Interface
Power Supply: USB Power Supply
Working Voltage: 5V
Working Current: 100mA
How to Use:
1. Connect the device to a PC o for Android system using a connecting cable.
2. Turn on the software.
3. Place the IC card above the card reader and the LED light on the right side of the product. Red indicates standby mode and green indicates successful card reading.
packing list:
1 xIC Card Reader
1 x USB Cable