Servo Driver HAT Compatible with Raspberry Pi 5/4/3B+/3B/Zero/Zero W/Zero 2W and Jetson Nano,16-Channel 12-Bit I2C, Suitable for Robotic Arms or Hexapods Robots Driving Servos, Bent PinHeader
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
This is a PWM/servo expansion board Compatible with Raspberry Pi 5/4/3B+/3B/Zero/Zero W/Zero WH/ Zero 2W and Jetson Nano. It can expand 16-ch servo control or PWM output through the PCA9685 chip, and each channel has a 12-bit resolution. With the I2C interface for controlling, it does not require any other pins.
I2C interface control, only 2 signal lines are needed to achieve servo drive. Reserved I2C control interface for easy access to other main control boards.
Supports up to 16 servos or PWM outputs, each with 12-bit resolution (4096 levels). It is suitable for controlling robotic arms and various servo robots.
Onboard 5V voltage regulator chip, output up to 3A current, can be connected to battery power through VIN terminal.
Onboard standard servo interface, can be connected to SG90, MG90S, MG996R and other common servos.
Comes with Online Development Resources /User Manual, please follow there: bit.ly/3ryoMht
ESP32-C6 1.47inch Display Development Board,172×320, 262K RGB Color, 262K Color, 160MHz Running Frequency Single-core Processor, Support W-iF-i & BLE, with Colorful RGB LED, ESP32 with Display
SAR 101
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 NVMe PoE HAT+ Support NVMe M.2 Solid State Drive SSD 2230/2242/2260/2280, High-Speed Reading/Writing
SAR 161
ESP32-S3 Development Board with 4.3inch Touch Screen IPS Display 800x480 Resolution, 32-Bit LX7 Dual-Core Processor Support CAN RS485 I2C Interface, 2.4 G H z W-i-F-i/Blue-Too-th 5, with Case
SAR 291
Mini Base Board Compatible with Raspberry Pi Compute Module 5 Lite/eMMC Series, CM5 Base Board with Color-Coded 40PIN GPIO Header/PCIe/MIPI/HDMI/USB 3.2/USB 2.0 FFC/Gigabit Ethernet Interface,etc.
SAR 146
