INDUSTRIALFTDI FT232RL CHIP USB TO D-SUB 25PIN DB25 MALE CONNECTOR ADAPTER RS232 SERIAL COMMUNICATION CNC PROGRAMMING CABLE FOR C-232R US-232R
This cable is designed to make connection between USB port and serial devices(RS232), NOT for parallel printeror other devices based on parallel protocol (IEEE-1284), even though both have DB25 connector. It is a USB to Serial cable with Software Handshaking using only three signals: TXD(Pin2), RXD(pin3) and GND(pin7). Please doubel check your devices setup prior to purchase.
Operating Systems:

10/8/8.1/7/Windows Server 2008/2003/Vista/XP/98
Linux

OS X/9/8

CE.NET (Version 4.2 and greater)
32 and 64 bit operating systems are both supported.
F&T>D*I DRIVER DOWNLOADING:https://ftdichip.com/drivers/vcp-drivers/
INSTALLATION GUIDELINE:https://ftdichip.com/document/installation-guides/
Package Contents:
1 X F&T>D*I USB toDB25 Cable
Length: 1.8M/6FT, 3.0M/10FT, 5.0M/16.4FT(Approx.)
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
If you have special requirements, such as cable length, wire gauges and pinouts, please consult to me online or leave me a message.
If you receive the goods, and have any dissatisfaction or need assistance, please feel to contact me or leave me a message.
F&T>D*I usb rs232 to DB25 connector cable, usb serial connector to db25 cable
==========
Package : Yes
Model Number : RX-232-USB-DB-026
TY>pe : Serial Cable
Certification : CE,FCC,UL