PCIe to USB 3.2 Gen1 2.5G ETH and M.2 adapter board is compatible with Raspberry Pi, Dual 2.5G Ethernet Ports & Dual USB 3.2 Ports & M.2 NVMe Slot. Driver-free, plug and play.
Support NVMe Drive Protocol. Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive. Supports Gen2 Mode, Supports Booting PI5 From Solid State Drive.
Onboard 2-channel USB 3.2 ports: Extends The PCIe Interface To 2-ch High-Speed USB 3.2 Gen1 Ports for connecting more peripherals. Extends 2-channel 2.5G Ethernet ports: Onboard RTL8156B high-performance Gigabit ETH chip, sinking design of network port, neat and beautiful.
Improves reading/writing speed of your Pi. Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive.
Onboard Dual LED Indicators. Easy to monitor the Working Status. Onboard Power Monitoring Chip And EEPROM. Real-time monitoring of Solid State Drive power status for More Stable operation.
Comes with Online Development Resources and Tutorials to help you get started quickly: bit.ly/4kf6OpP
Pi Compute Module 4 Kit Comes with CM4104032-4GB RAM 32GB eMMC Flash with Wi-Fi, with CM4 Heatsink and CM4 Antenna, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Wireless & Bluetooth 5.0 (CM4104032 Kit)
SAR 637
SIM7028 NB-IoT HAT with GSM Antenna Onboard 40PIN GPIO Header for Raspberry Pi 5/4B/3B+/3B/2B/Zero/Zero 2W/Jetson Nano,etc, Supports Global Band NB-IoT Communication, 2400bps ~ 460900bps Baudrate
SAR 121
ESP32-S3 Development Board with 1.69inch LCD IPS Display 240×280 Pixels 262K Color,USB Type-C Embedded ST7789V2 Display Driver, Accelerometer and Gyroscope Sensor, Support 2.4GHz W-i-F-i/Blue-too-th 5
SAR 121
Luck-Fox Pico Ultra PoE Kit RV1106 Linux Micro Development Board, Integrate ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 256MB DDR3L 8GB EMMC,Support MIPI CSI, GPIO, Interface,etc (with PoE Module)
SAR 181
