All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Back plate needs to be machined in order to fit the lathe chuck
You would not need to drill any mounting holes but you will need to turn the shoulder down .050" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle. When turning the shoulder of the backing plate, ONLY TURN THE SHOULDER OF THE BACKING PLATE WHEN ATTACHED TO THE LATHE SPINDLE.
If you use a chuck to clamp the backing plate and then turn it, the backing plate will not be true to the lathe spindle and will have more runout than specified when the chuck and back plate are put together.
Back Plate Diameter:3.93"; Spindle Nose Type: Threaded; Compatible chuck diameter: 4; Mounting: 1-1/2 - 8; Bolt Circle Diameter: 3.307"
Product Included: -1 pc of 4" 4 jaw Independent Chuck (p/n 202-5419); -1 pc of 3.93" Fully Machined Threaded Back Plate (p/n 202-6108-6)
AP8-D4 8" D1-4 Fully Machined Camlock Back Plate for CS FS Lathe Chucks New 202-1845 R[
SAR 784
Shars BXA 222 Quick Change Tool Post Wedge Type 6 PCS Set for Lathe 10" - 15" Lathe Swing 202-9475 L
SAR 709
SHARS R8 Shank to 2MT Sleeve Fits Bridgeport MT2 Morse Taper New 202-1433 P
SAR 87
Shars OXA #1 Quick Change Turning & Facing Holder 001 202-9513 P}
SAR 289
