1. Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output.
2. Self‑powered, no external power supply required.
3. Easy to install and use, no need to connect DC into the circuit when measuring.
4. Measured current AC 0‑10/20/50A, output signal DC 0‑10V.
5. Straight‑through structure design, isolation withstand voltage up to 2000V.

Specification:
Features:
1. Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output.
2. Self-powered, no external power supply required.
3. Easy to install and use, no need to connect DC into the circuit when measuring.
4. Measured current AC 0-10/20/50A, output signal DC 0-10V.
5. Straight-through structure design, isolation withstand voltage up to 2000V.
6. Hysteresis is less than 1% and can be used under strong magnetic conditions.
7. The outer casing is made of self-extinguishing material ABS.
8. Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on.

Specification:
Model: SZT15--10V
Supply power: Not required
Output type: 0-10V DC
Input straight-through current: AC 0-10A/20A/50A
Switch on minimum: 0.5±0.2A
Maximum overload of straight-through current: 200%
Accuracy: ±1%
Power consumption: ≤1W
Leakage current: ≤1mA
Hysteresis: ≤1%
Linearity: 10%-
Straight-through wire diameter: 0.35-20mm
Response time: ≤200ms
Withstand voltage: 2000VAC 50/60Hz 1min
Working environment: -20~60℃, 5-95%RH
: 61.5*90*26mm / 2.4*3.5*1.0in
Hole diameter: 20mm / 0.8in
Package weight: Approx. 107g/3.8oz

Package list:
1 * AC Current Transmitter

Note:
1. Due to the difference between monitors and light effects, the