A valve is a device that regulates, directs or controls the flow of a fluid gases, steam, liquids, fluidized solids, or slurries by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input i.e., regulating flow through a pipe to a changing set point require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and setup, allowing the valve to be positioned accurately, and allowing control over a variety of requirements. Specifications. Size 0.5 in.. Height 1.75 in.. Width 3.2 in.. Length 3 in.