Working Voltage: 3.0~5.5V wide voltage power supply, onboard pull-up resisto, can be directly connected to ESP32, Raspberry Pi, Arduino, etc. without using conversion level, ensure circuit stability and anti-interference ability
Measuring Temperature Range: -55-125℃ (-67-257°F), 9-12 adjustable resolution to capture small temperature fluctuations
Wiring Method: Connect the female to female Du-Pont wire to the output terminal; connect the plug-in terminal to the stainless steel probe, the yellow wire to the DAT pin, the red wire to the VCC pin, and the black wire to the GND pin
Widely Application: Industrial systems, such as boiler temperature control, blast furnace water cycle monitoring; agricultural and environmental monitoring, such as agricultural greenhouse temperature control, weather station temperature collection; constant temperature control, smart home temperature control, etc
What you will get? You will get 6 pieces temperature sensor, 6 piesec 2-meter-long waterproof stainless steel probes and 18 pieces female to female jumper wires
uxcell 2 Pcs 8mm Dia G1/2 Thermowell Weldless Stainless Steel 201 with Cable Gland 30mm Length for Beer Fermenter, White
SAR 47
CX-402-VFC215 VFC Vaccine Monitoring Bluetooth Temperature Data Logger w/ 15 ml Glycol Bottle and 2 Meter Sensor Length
SAR 897
Aftermarket Sullair 042582 Temperature Gauge | Replacement Part | for Compressed Air Equipment & Systems
SAR 897
Digital Thermocouple Thermometer Dual Channel K Type Thermometer with 4 K Type Thermocouple Probes, -328~2501℉ Thermocouple Tester with LED Backlight Display
SAR 110
