Ionizing Air Bar Static Eliminator, 7KV High Voltage Generator Static Electricity Remover, 2x 7.8” Ionizing Bar, 110V Rapid Anti Static Removal Rod , Air Compressor Required
Ionizing air bar static eliminator comes with 2x 7.8” ionizing bars, each of 5.5” effective ionizing length, built with densely distributed 316 stainless steel ionizing needles that can eliminate static in 0.5sec
Ionizing air rod static remover equipped with a 7KV generator to deliver high power, allowing users to adjust the air flow, suitable for a variety of scenarios, recommended distance 1.2”-2.0” from the workpieces
Static remover designed with high voltage inductive air ionizing technique and power-off protection in case of short circuit or voltage fluctuations, safety current limit
Ionizing air bars made of aluminum alloy materials, durable and lightweight for stable setup and mount, used to eliminate static for handling electronics, film, textile, printing, coating, plastic plate, and more
Static electricity eliminator remover with an air inlet of 8mm is required to work with an air compressor, recommended air pressure 57-113PSI; the air source should be clean and dry
SPECIFICATION
Input Voltage: AC 110V 60Hz
Output Voltage: 7KV
Power: 30W
Recommended Air Pressure: 57-113PSI
Airflow Rate: 10m/s
Static Eliminating Time: ≤ 0.5s
Hose Size: 140*100*120
Ionizing Bar Length: 7.8”
Effective Ionizing Length: 5.5”
High Voltage Cable Length: 9.8ft
Operating Temperature: -10℃-+50℃,
PACKAGE
1 x 7KV High Voltage Generator
2 x Ionizing Bar
1 x Set of Mounting Accessories
1 x Power Cord