One Pair of 10x20 Drag Chain Joints Bridge non opening end Connectors Plastic towline Cable Wire Carriertanks chain
Towline selection of main parameters:
Within high: Select built-in cable, tubing, pipe, pipe, etc. As one of the most coarse reference height,plus at least 10% of the height of the space within the towline as high. If the overlap byoverlapping the actual height as the reference height.
Wide: Choose thicker some cables, tubing, pipe, water pipes, with its outer diameter and as thetowline wide reference, and stay at least 10% of the width of the space.
Bending radii R: choose built-in cable, tubing, pipe, pipe, etc. The maximum bending radius as a reference value, and left more than 10 percent of the space.
Use towline length = R + 0.5R + stroke / 2
After bending towline total height = 2R + external high
Towline place principles:
Should leave 15% of the remaining space for built-in cable, tubing, etc., may move freely in theradial direction of the towline does not produce tension. Larger diameter difference between thewire should be laid separately, weight distribution, if necessary, be separated by the dividing sheet.
In the high-speed or high-frequency operation, to try to make the wires apart from each other on a level, do not make it mutually stacked more time in the cable, pipe, tubing, etc. is recommended to
use separators.
==========
Hign-concerned Chemical : none
Item Type : Mechanical Kit/Hardware Parts
Material : Plastic
Model Number : Miniature Series 10
Structure : Bridge non opening
Joint type : A Type
Joint hole pitch : A=10mm
Type for : 10X20
Color : Black
Products Status : Stock