controller
DimmersT-1000SDescription: Memory card:Type: SD cardCapacity: 128MB-2GBStorage file: *.ledPhysical parameters:Working temperature: -30-85℃Working voltage: DC5V/DC7.5-24VWorking power: 2WWeight: 0.3kgSize: L165mm×W80mm×H30mmSignal port: 3pin connection portT-1000S system features 1.32-65536 grayscale and supports software Gamma correction.2. Supports points lines surfaces rules and special-shaped handles.3. Single port output can support 2048 pixels.4. Multiple controllers can be cascaded together and work synchronously Play content stored on SD card.5. Compatible with single-line or dual-line chips.notes:When the T1000S controller load is less than 512 pixels the frame rate can reach 30fps.When the T-1000 controls more than 512 pixels the frame rate automatically slows down.Support IC (one IC represents one pixel)Button definitionfeature:1. 256 grayscale Gamma correction processing software.2.Support rules and special-shaped handles.3. The controller has one port output and can be equipped with 1024/2048 lights.4. Offline control playback of content stored in SD card5. T-1000C can store up to 16 documentsNote: The T-1000S model has one output and the frame rate can reach 30fps when controlling 512 pixels. The frame rate will automatically slow down when exceeding 512 pixels.Connection Diagram:Adjust function buttons:System architecture diagram:Specific parameters:storage card:. Type: SD card. Capacity: 128MB-2GB. File format: FAT file format. Storage file: *.ledPhysical parameters:. Weight: 0.2kg. Size: 122mm*67mm*25mm. Temperature: -40-85 degrees. Voltage: DC5V/DC7.5-24V. Power: 3WNote: To copy files to the SD card the SD card must be formatted first. Note that it must be formatted before each copy.The SD card must be format