Application:
Compatible with Boss HYD01633, HYD08831

Compatible with Trombetta 684-1211-212, 684-1211-212-02, 684-1211-212-06, 684-1251-212, 684-1261-212. The suffix numbers (e.g., -02, -06, -51, -61) denote hardware variations (e.g., stud types) and do not affect core solenoid functionality.

Compatible with Driving hydraulic power packs on your tractors, Snow Plow, Tailgate Lifts, Electric Pallet Jacks, Fork trucks, Floor Scrubbers, Utility Vehicles, and Golf Carts

Specification:
Voltage: 12V
Carry Current 150 Amps, Inrush 800 Amps
Terminals: 4
Duty: 25% Intermittent
Mounting Type: L Bracket Curved
Contacts Material: Copper
(2) 5/16-24 High Current Studs
(2) Non-Grounded 10-32 Studs

Sealed Design
If your application requires a sealed or submersible design, you must have this one.Sealed design protects against dust and water jets. IP67 environmental rating allows it to be submerged into 1 meter of water for a period of 30 minutes. It is not intended to operate under water. If this unit is exposed to water and completely dried off afterwards, it should be capable of being energized again.

Mounting Instructions:
Positioning: Select a suitable mounting location.
Template Alignment: Use the contactor as a template to mark mounting hole centers.
Drilling: Drill holes with a ¼-inch (6.35mm) drill bit.
Installation: Secure the contactor using ¼-inch bolts and nuts.
Wiring: Terminate relay leads per your wiring diagram.