Coil heater description:
Hot runner heater's production length in 200-3000mm is mainly used for hot runner mold or, as well as other precision heating . Spring heating ring external using Ni-Cr steel tube, the internal use of high purity magnesium oxide , high temperature resistance wire, and first-class manufacturing technology . The wire is after the annealed, with flexibility can be bent into an arc or circle heating. Its high working temperature, fast heating, uniform heating precision, long service life, can be automatically area, high thermal conduction, while internal heating material damage, external can reuse.

Product Feature:
1. Heating cross section as follows:
Round(DIA)
3mm,3.3mm,3.5mm
Square
3X3mm,3.3X3.3mm,3.5X3.5mm
Rectangular
2X4mm,4.2X2.4mm,1.3X2.3mm,4.2X2.2mm

2.Heating coil ID 10mm ~ 38mm, heating ring height: 40mm ~ 200mm
3. voltage: 220V ~ 380V,wattages: 200W ~ 3000W(6.5W/CM2 )
4.Built-in thermocouple
5.Lead wire:500mm 1000mm 1200mm 1500mm,2000mm (Teflon wire lead with s.steel braided or fiberglass silicone sheath)
6. Max. Temperature: 650°C
7.Typical Applications :Plastic Die Applications;Blow Molding Machine ; Extrusion ;Hot Runner ;Injection Molding ; Thermoforming and etc.

Hot Runner Heater Photos:
ID18mm,
OD 50mm
120v/150w
Lead wire 1000mm( sleeve)
With Thermocouple k
With 5pin xlr connector(1&2 power wire 34 tc 5 ground wire