AURSINC TinySA Ultra+ ZS406 Spectrum Analyzer, 4.0 Inch 100kHz-5.4GHz Handheld Tiny Frequency Analyzer with ZK09-BM LNA Amplifier, Ultra-Broadband, 100k-10GHz, 21db Gain, with 32GB Card, 2025
[With ZK09-BM LNA] The ZK09-BM RF LNA delivers high performance with ultra-broadband 100k-10GHz coverage, featuring low noise, excellent flatness, 21dB gain, and 13dBm output power. USB-powered with a built-in 300mAh battery, it cuts power use for portability, boasting flatter gain, lower noise, a compact design, and 5-hour runtime. Ideal as a 5.8GHz preamplifier for tinySA ULTRA to boost high-frequency sensitivity
[2025 Updated Tinysa ultra+ ZS406] AURSINC Tinysa Ultra+ ZS406 installed with HW V0.4.6, with 4.0 inch 480*320 touchscreen display, 100kHz to 5.4GHz widely measure range. Built-in 32GB micro SD card, solving the on-site data storage issue, convenient for data sharing and storage. Built-in 5000mAh battery, a fully-charged battery allows for at least 3 hours of operation, without frequent recharging interruptions
[Widely Frequency Range] The Tiny sa ULTRA+ has an ultra measuring frequency range of 100kHz to 5.4GHz, spectrum analyzer for 100kHz-900MHz and Ultra mode up to 6GHz. Switchable resolution bandpass filters from 200Hz to 850kHz, you could fast and accurate execute measurement tests. Color display showing max 450 points providing gapless covering up to the full frequency range
[2-in-1 Functionality Spectrum Analyzer & Signal Generator] When not used as a Spectrum Analyzer, it can be used as a Signal Generator, with sinus output between 0.1-900MHz, UHF square wave output between 900MHz-4.4GHz, and mixing signal output between 4.4GHz-5.4GHz. It also features a built-in calibration signal generator, used for automatic self-test and low-input calibration
[Convenient PC Control] This tinysa ultra can connect to a PC via USB, Tinysa-APP directly transfers data to the computer. The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings
[What You Get] 1x Tinysa ULTRA Spectrum Analyzer (built-in 5000mah rechargeable battery); 1x ZK09-BM LNA; 1x 32GB Micro SD card (plugged in the host); 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x stylus pen
-13%
Portable tinysa Spectrum Analyzer - AURSINC V0.3.1 Hand Held Frequency Analyzer | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator
SAR 344
AURSINC Filter Attenuator, RF Demo Kit NanoVNA RF Tester Board for NanoVNA-H NanoVNA-F Vector Network Analyzer Kits
SAR 89
Upgraded NanoVNA V2 PLUS4 Vector Network Analyzer 50kHz-4GHz, AURSINC 4'' Antenna Analyzer HF VHF UHF Measuring S Parameters, Voltage Standing Wave Ratio, Phase Delay, Smith Chart with 3200mAh Battery
SAR 1,203
Upgrated AURSINC NanoVNA V3 NanoRFE VNA6000 Vector Network Analyzer 50kHz-6GHz HF VHF UHF Portable Antenna Analyzer Ham Radio with 4'' Touchscreen Measuring S Parameters, SWR, Phase, Delay,Smith Chart
SAR 4,094
