THE SUPERIOR TIRE SEALANT ON THE MARKET – Sahara is a high-speed and slow-speed product designed for high speed vehicles and industrial equipment tires. Sahara reduces the operating temperature of the tire leading to improved fuel economy. Prevents air loss by sealing around puncture-creating objects (nails, bolts, glass etc.) up to ½” or 1.3 cm in diameter, while a combination of biodegradable fibers stop moisture from entering the steel belt area. Stops air loss and retains correct pressure by sealing the entire casing from normal casing porosity. Improves the seal over buffed areas. Reduces heat buildup in tires. Balances wheel end assembly. Protects the casing from heat, oxidation and UV damage. Dissipates tire chamber heat so that tires run cooler. Does not pool to the bottom or block the valve system. Absorbs moisture. Performs with compressed air and Nitrogen. Approved for use with TPMS. Helps retain casing integrity. Continually self-seals punctures up to ½” (1.3 cm) in diameter. Stops Bead/Rim/O-ring and Vent leaks. Washes out easily. Added safety for recapped tires. Operates between -58°F to 370°F (-50°C to 188°C). Non-toxic and biodegradable high grade chemical. Does not freeze. Stallion Sahara is a high and slow speed medium viscosity product and therefore the tire has to be completely deflated before installation. Position the valve stem at 2 o'clock or at 10 o'clock. It is TPMS safe but some TPMS have a small inlet so you may have to break the bead for installation. We have tried our best to accommodate all types of TPMS valves and sometimes it is beyond our control and therefore we urge you to contact us immediately for assistance and support. We are connected nation wide with Myers tire supply and our product is the only tire sealant that passed all tire engineers tests with Akron labs.