Product Characteristics: This MAP sensor is used to calculate air density and determine the engine's air mass flow rate and provides instantaneous manifold pressure information to the engine's electronic control unit.
Feature: Made of good quality material. It is stable and durable, use for a long time.
Installation: 1.Install: Remove old sensor; mount new in engine bay (passenger side).2.Vacuum & Wiring: Connect to BOV source; route wires through firewall to door; link to MAP power (note signal).3.ECU: Plug into ports (see manual); ECU under p-side carpet.4.Bypass: Splice new power/ground to factory; insulate old signal; connect new to UTEC.5.Calibrate: In UTEC (Edit Maps>Params>Special), input intercept/gradient per manual's voltage/pressure.6.Test: To drive and check loose/solder issues.
Engine Connector Pipe 11118511205 Replacement for BMW F30 G20 X1 X2 X3 X4 320i 530i 730i Replace Parts
SAR 79
Engine Oil Level Sensor for Audi A4 A5 A6 A7 Q5 Q7 S4 S5 Oil Level Sending Unit Replace 03C907660H 03C907660D 03C907660H Replace Parts
SAR 102
1 Set CV Joint Boot Kit for Infiniti EX35 2008-2012 for Infiniti FX35 09-12 Outer Constant Velocity Joint Boot W/Clamps No.39241CG027 Black Rubber
SAR 45
Front Driver and Passenger Side ABS Wheel Speed Sensor Fit for Cadillac SRX 2010-2012 No.15921849 - Pack of 2 Replace Parts
SAR 105
