Vehicle Fitment:
Replacement for 2006-2011 BMW 323i
Replacement for 2006 BMW 325i
Replacement for 2006 BMW 325xi
Replacement for 2007-2012 BMW 328i
Replacement for 2009-2012 BMW 328i xDrive
Replacement for 2007-2008 BMW 328xi
Replacement for 2006 BMW 330i
Replacement for 2006 BMW 330xi
Replacement for 2009-2011 BMW 335d
Replacement for 2007-2011 BMW 335i
Replacement for 2009-2011 BMW 335i xDrive
Replacement for 2007-2008 BMW 335xi
Replacement for 2008-2011 BMW M3
Install the window regulator as follows:
Part-1 Disconnecting the Window from the Motor
1.Remove the interior door panel.
2.Gently remove the plastic door cover.
3.Locate the window mounting bolts.
4.Move the window if necessary to access the bolts.
5.Remove the bolts while a friend supports the window.
6.Raise the window up into the door frame.
7.Use masking tape to secure the window in place.
Part-2 Disconnecting the Motor and Regulator
8.Remove the window regulator bolts.
9.Locate and remove the window motor mounting bolts.
10.Disconnect the motor wiring harness connector.
11.Remove the motor and regulator through the access port.
12. Connect the regulator to the new motor.
Part-3 Installing a New Power Window Motor
13.Slide the new motor and regulator back into place.
14.Replace the mounting bolts.
15.Reconnect the electrical connector.
16.Remove the masking tape and lower the window back down.
17.Insert the window mounting bolts.
18.Reinstall the plastic liner and interior panel.