1. PORTABLE AND EASY TO USE: This is a portable small loop antenna, which is easy and fast to set up the antenna for your shortwave transceiver antenna
2. PRACTICAL FUNCTION: Let you enjoy the pleasure of multi band reception and communication at indoors, window, balconies and outdoors
3. REDUCE INTERFERENCE: Interference resistant, possess low standing wave, strong directionality, full frequency band
4. EXTENDED USE METHOD: Remove the pull rod antenna. Connect a 20 meter long wire. The long cable frame is erected high or on the roof. Tuning method is the same as above. The launch efficiency will increase several times. This method can replace the pull rod antenna
5. MAIN APPLICATIONS: Used for signal receiving and sending, aluminum alloy and steel material is durable, resistant

Spec:
Item Type: QRP Shortwave Antenna
Material: Aluminum alloy, steel
Purpose: Signal reception
Basic Parameters:
FRQ: 3.5~30MHZ, 50~54MHZ, 76~108MHZ, 117~136MHZ, 136~174MHZ, 400~470MHZ

How to Use:
Usage: The upper knob is the band switch of each frequency. The knob below is for frequency acidal tuning. The upper outer ring is 11 and the inner ring is 50, representing the universal position from 11 to 50 MHZ. 8 and FM means that both the 8Mhz and FM bands can use this location. And so on. Then select the knob below for fine tuning to find the best standing wave suggestion link talent to view the helical oscillator point.

packing list:
1 x Tuner
1 x Antenna
1 x Connector
1 x Antenna Storage Tube

Notice:
Outdoor use is the best, indoor use antenna as close as possible to the window, reinforced concrete fully enclosed environment, against the wall and other environments, part of the frequency band standing wave ratio is not ideal.