2 in 1 mSATA / M.2 NGFF SSD to SATA Converter Adapter Card
This new 2-1 Thunder Board is the latest All in one M.2 & mSATA SSD to SATA Adapter in the market. Use it to easily connect any of the 6 different size M.2 or mSATA SSDs to any SATA port. Once installed, the NGFF M.2 SSD or mSATA behaves like the 2.5"HDD with low power consumption, fast access time and completely shock resistant.

Support Hi-Speed SATA3 6Gbps mass storage interface. Read speed up to 520MB/s.
Green LED indicates power status; Red LED indicates active status; Thermal shutdown protection.

Support the following form factor M.2(NGFF) SSD
Type 2230-D2-B-M: 30mm(L) x 22mm(W)
Type 2242-D2-B-M: 42mm(L) x 22mm(W)
Type 2260-D2-B-M: 60mm(L) x 22mm(W)
Type 2280-D2-B-M: 80mm(L) x 22mm(W)

Support the following form factor mSATA SSD:
Half size mSATA : 26.8mm(L) x 30mm(W)
Full size mSATA : 50.95mm(L) x 30mm(W)

Note:
If both M.2 & mSATA SSD inserted at the same time the M.2 SSD will take priority. The mSATA SSD will be disabled until the M.2 SSD is removed.

Package Included:
1 x 2 In 1 Converter Adapter
1 x set screws