Dimension: 12.4"L × 6.3"W.-Design: Standard frame for U.S. license plate, do not block registration tags in all four corners in most states. Easy to Install:-1. Remove the license plate from your car, align it into the frame to make sure all holes are fits well;-2. Place 2 screw washers in position, screw through holes and tighten to vechicle;-3. Place the caps over washer upright position;-4. Push screw over down firmly until engages with a snap. Package Includes:-2 x License Plate Frames-2 x Machine screws-2 x Self-tapping screws-4 x Plastic screw caps-4 x Washers-4 x Spacers-1 x Screwdriver