Search

Search

Home / Sumklin / Wiring & Connecting
2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module in Saudi Arabia 2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module in Saudi Arabia 2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module in Saudi Arabia 2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module in Saudi Arabia 2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module in Saudi Arabia 2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module in Saudi Arabia

2 PCS Low Voltage Cutoff, DC 12V-36V Voltage Protection Digital Display Switch Module Over Discharge Protection Low Voltage Protector Disconnect Switch Module

Sorry, this product is not available
Brand
Sumklin

Special Features

  • Parameters:XH-M609 battery over discharge protection module comes with input voltage of DC 6V-30V, voltage control accuracy of 0.1V, power consumption <1.5W, product size 57*42*19mm/2.24*1.65*0.75inch, package including 2 pieces module
  • Battery Protection:The low voltage cutoff module contains over-charging, over-discharging, short-circuit and over-current protection functions, and also has accurate voltage monitoring function, which can detect the battery voltage in time. When the battery voltage is insufficient or the charging is insufficient, it will automatically cut off the power to prevent the battery from over-discharging and causing damage
  • Restore Factory Settings:Under the state of power disconnection, press and hold the two buttons at the same time, then power on, then the screen displays "888", which indicates that the factory settings have been restored successfully.Factory set protection value: 12V, return value: 2V
  • Tips:Due to the relay size of this battery protection module is tiny and the circuit lines are very thin. The current should not be too large during actual use. If the current exceeds 8A, the relay contacts may be blown and cannot be used normally.The maximum current is 10A when the voltage is below 12V, and less than 8A when the voltage exceeds 12V
  • Widely applications:All applicable voltage range of electric two-wheeled, three-wheeled vehicle battery; car battery and new energy electric vehicle battery discharge protection: all kinds of storage battery over-discharge protection; and solar energy, wind energy and other power supply systems

Description

"Specifications:
Supply voltage: 12-36V battery
Output voltage: equal to the supply voltage
Control accuracy: 0.1V
Power: ＜1.5W
Scope of application: various batteries lithium battery
Net weight: approx. 28g / 1.0oz
Product size: approx. 57*42*19mm / 2.2*1.7*0.7in

How to use:
The first time a new battery is used, the rated voltage value is close to the actual value, Judgment to stop the discharge voltage. A reasonable discharge voltage value can be obtained according to the general voltage calculation method of the battery. When the old battery is used, the actual voltage value and the rated voltage value are quite different, so you need to measure the stop voltage value in actual use.
Battery charging usually uses slow charging (the voltage and current of fast charging are relatively large, and the battery is easily damaged.) The charging voltage of slow charging is 1.2 times the rated voltage, and the charging current is adjusted to about 2/10 of the rated capacity current of the battery. For example: the charging voltage of a 6V 50Ah battery is about 7.2V, adjust the charging current to 10A."

Related Items