【Powerful Electric Air Pump】The air pump inflates up to 20PSI and is designed to quickly inflate paddle boards, inflatable boats and inflatable beds. It can inflate 3* paddle boards, 5* air mattresses, 45* swimming rings after a full charge. This mattress pump is equipped with inflation and deflation holes, allowing the product to be inflated and deflated easily.
【Dual Inflate and Deflate Holes】This portable air pump has a fast inflate and deflate valve at the top and a slow inflate and deflate valve at the bottom. Fully functional design, suitable for inflating pool floats such as air beds and swimming rings, and also suitable for deflating vacuum storage bags to meet your storage needs.
【Camping and Emergency Lighting】This battery inflatable pump can not only be an inflatable pump, but also has LED lighting function, it can be a camping light and emergency light, in case of emergency, to provide convenience for your outdoor activities.
【3000mAh Battery & Portable 】 Are you still bothered by the large air pump, the need to plug in or manually inflate the inflatable? This rechargeable air pump has a built-in 3000 mAh battery and can operate for 35-90 minutes on a full charge. You can get rid of these problems by taking the air pump anywhere to easily and quickly inflate and deflate the paddle board, etc.
【8 Nozzles Optional】The battery air pump comes with 4 types and sizes of nozzles for pool floats such as airbeds, inflatable pools, boats, sofas, chairs, waterbeds and swimming rings. It is a must-have air pump for outdoor sports enthusiasts and a must-have good for indoor home inflatable storage.
Description
How to use Step 1 Attach the paddleboard nozzle to the quick fill port (low pressure fill port) on the top of the product Note: Tighten the nozzle. Step 2 Inflate the paddleboard to 80% of the product. NOTE: Check for air leaks. lf this occurs, reinstall the nozzle onto the paddleboard. Step 3 Then switch to the bottom of the product and install the high pressure adapter (tighten) and the paddleboard nozzle tothe connector for slow inflation (high pressure inflation). NOTE: Tighten the adapter so that there is no gap between the two. Step 4 Inflate the paddleboard until it is full of product. NOTE: Before use, check the stifness and inflation of the paddleboard to ensure it is fully inflated