Product Name :PC Water Cooling System Hose Fitting
Material: Brass
Color: Black
Dimensions: Height 22mm/0.87 inches, width 20mm/0.78 inches
Outer diameter 12.7mm/ 0.5in, inner diameter 9.5mm/ 0.37in (support hose 9.5x12.7).
Simplify the process of setting liquid cooling loop.
Through the use of 4 pre-assembled O-rings and a comprehensive design, a seal superior to conventional compression fittings is provided.
The hose compression fitting consists of two parts, the main part is the base, which is very similar to the standard barb fitting, but it has an additional thread.
The other part is the locking ring, which screws to the bottom of the pipe fitting to prevent the pipe from slipping off the barb.
Compression fittings are popular because they do not require welding, so they are relatively fast and easy to use.
Accessories do not require special tools or skills to operate.
They work under high pressure and toxic gases. Compression fittings are especially useful in installations that require occasional or partial removal for maintenance.
Because these joints can be disconnected and reconnected without affecting the integrity of the joints.
They are also used in cases where the use of heat sources, especially welding torches, is prohibited, or where it is difficult to remove residual water from the pipe, which would prevent the pipe from heating up for welding.
A compression fitting is a solid tube compression fitting designed for use with solid tubes such as acrylic, copper, stainless steel or any other type of compatible hard tube.
Package Contents: 2PCS PC Water Cooling System Hose Fittings