Ender 5 Plus Upgrades PEI: FYSETC 3D Smooth PEO+Textured PEI Spring Steel Sheet Only 377x370mm/14.84x14.56inch No Magetic Sticker Flexible Heated Bed Build Plate for 3D Print Filament PLA PETG ABS
1. A NEW Ender 5 Plus Build Plate Top Plate Only: 1PC 377x370mm/14.84x14.56in Smooth PEO+Textured PEI Flexible Removable Heated Bed Replacement Accessory, No magentic bottom sheet.
2. Double sided Build Plate: One side textured pei powder(Gold) + another coated PEO sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the smooth side. It leaves a Diamondlike finish inside with the beautiful-texture.
3. Solution for first layer adhesion: **Do Not Sand on this PEO bed to avoid permanent damage.** No glue, No tap, Adjusting an Appropriate Z value is very important, if too low causing a filament buildup and easily scratch the print bed. Too high the prints come off the build plate, can't stick onto the hotbed. Key factors for a good layer: Turn OFF the cooling fan and Slow Down the speed to 10-25mm/s when printing the first few layers. A Dry filament and Skirtings also help.
4. Wide 3d printing material Compatibility: The PEI Printing Surface can be compatible with PLA, PETG, TPU, ABS, PA-CF, WOOD and any other filaments. Perfect printing size works well with Crealty Ender 5 Plus. Different filament has a bed temperature setup, our testing result for your reference: PLA: 50-65℃, PETG: 70-80℃, TPU: 60-70, ABS: 90-100℃. For high-temp required filament ABS, we recommend to print on the Textured PEI surface, Not on the Smooth PEO side.
5. Simple Installation and Use: A drop-in replacement for the stock glass bed. First install a magetic sticker onto the non-heated bed, then align this flexible spring steel onto it. The steel PEI plate can be magnetically bonded to the sticker. Then level the bed with auto bed leveling sensor. Easy to adhere the filaments to the printing bed. No need for tape and glue stick which release your printing anxiety. Easy to remove the prints, slightly flex it repeatedly to pop your prints right off.
Description
A newest spring steel plate for Ender 5 plus 3D Printer.
Package includes 1* 377x370mm/14.84x14.56inch PEO-Textured spring pei sheet Only, not come with a magentic sticker. A perfect spare part for the same size magetic build plate kit (Asin:B09BTV3YBC or B09P8KD4B2 or X0039BLRTB or B0BJPTTNYS) at our store.
FYSETC Prus i3 Hotend MK3S+ J-Head Extruder Kit 24V 40W for 1.75mm Direct Filament Compatible with Prus i3 MK3/MK3S/MK3S+ and Other E3 V6 Remote Printhead Printer with Silicon Cover and 0.4mm Nozzle
SAR 173
FYSETC 3D Printer Project Parts Vorn2.4 Auto Bed Leveling Sensor Omrn TL-Q5MC2-Z Proximity Switch 3 Wire DC10-30V Shield Type Inductive Probe Soldered with Cables Compatible with Vorn V2.2/ V2.4
SAR 120
FYSETC Ender 5 Plus Printing Platform PEO - Textured Flexbile Spring Steel Plate 377x370mm/14.84x14.56inch Build Plate Heated Bed Cover + Sticker Base Compatible with Ender 5 Plus 3D Printer Hotbed
SAR 287
FYSETC 3D Printer Accessories - Spriite Extruder Hotend Replacement Parts - Aluminum Heatsink: Clone Fast Cooling Block Fit Crealiity Ender 3 S1 Pro CR10 Smart Sermon V1 Original Heat Sink
SAR 79
