Compatible with Infiniti Models:
2008-2012 EX35
2013-2013 EX37
2003-2012 FX35
2013-2013 FX37
2003-2008 FX45
2009-2013 FX50
2011-2012 G25
2003-2008 G35
2008-2013 G37
2013-2013 HX35
2006-2009 M35
2003-2004 M45
2006-2010 M45
2015-2015 Q40
2002-2006 Q45
2014-2023 Q50
2014-2015 Q60
2017-2022 Q60
2014-2017 QX50
2014-2020 QX60
2014-2017 QX70
Compatible with Nissan Models:
2003-2009 350Z
2009-2020 370Z
2007-2023 Altima
2009-2021 GT-R
2023-2023 GT-R
2008-2014 Maxima
2016-2023 Maxima
2003-2007 Murano
2009-2023 Murano
2013-2020 Pathfinder
2011-2017 Quest
OE Number:
272206CA0A, 272251EA0A, 272253TA1A, 272256CA0A, 27225AM611, 27225JK60B, 27225JK60D, 27225JK60E, 27225JK61A, BM00156C, PM9316, 75850, 700193
How to replace with new blower motor?
1.Locate the blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles. And disconnect the blower motor electrical connector.
(Note: On older vehicles, the blower motor may be located in the engine compartment on the passenger side firewall).
2.Disconnect the blower motor electrical connector.
3.Remove the retaining screws to the blower motor assembly.Remove the motor from the box.
4.Re-install the new blower motor and connect the blower motor electrical connector and tighten the retaining screws.
5.Turn on the engine and the hvac system.Verify that the blower motor could work at all speed and produce hot or cold air.
6.Attention: Searching related vehicle installation video on the internet will be recommended. If you do not have enough skill or experience to install this part,it is recommended to seek the help from a qualified mechanic.
