Installed by a trained professional is highly recommended.
Torqued down to Factory Specs before installation.
Make sure all adapters get a FULL 6-8 Turns of the lugs when tightening. Or may result in damage to your vehicle.
The back of the adapter must sit flush against the vehicles hub.
No gap between the adapter and hub.
If your OEM studs are longer than the adapter, please replace with shorter ones, which is recommanded. Also, you can grind/cut them shorter, which is not recommended.
Specifications
Vehicle Bolt Pattern: 5x4.5"(114.3 mm)
Wheel Bolt Pattern: 5x5.5"(127 mm)
Thread Pitch: 1/2"x20
Thickness: 1 1/4"(31.75 mm)
Hub Bore: 2.81"(71.5 mm)
Package
2 or 4 Wheel Spacers

