The Gasoray air compressor piping kit boasts robust compatibility. If your workshop doesn't already have an air compression system, you can build your custom system from scratch to meet your needs. Alternatively, it can seamlessly integrate with existing systems for easy expansion or layout modifications.
Air compressor piping in garage
The use of air piping system in workshop is very common and most professional workshops have already used these systems. If you need torque to remove tires or lug nuts from vehicles, dual wheels, or to repair equipment, then you need a reliable compressed Air Piping System. There's no other safe way to apply the strength needed in these positions.
CUT
CUT the tubing square with the cutter,
Rotating wrist while cutting.
BEVEL
BEVEL the inside of the tubing by inserting the reaming tool and rotating it at least 3 full turns.
PUSH & TURN
PUSH the fitting onto the tubing and fully against the shoulder of the fitting.
TURN the nut hand tight. put a reference mark on the nut and fitting body.
TIGHTEN
TIGHTEN the nut with wrench a minimum 3/4 of a turn or until tight.
Compressed Air Piping Content List
5 pcs 1/2" NPT Drain Valves
2 pcs 3/4" "L" Fittings
4 pcs 3/4" Tubing Tree Fittings
6 pcs 1/2" NPT Fittings
1 pc BevelTool
1 pc Cutter
40 pcs Tubing Clips
5 pcs 4way Aluminum Blocks
Timber Screws
Protective Gloves
2pcs SEAL TAPE
5pcs FNPT Reducers