IDC pin pitch 2.54mm/0.1" male header connector. Standard IDC64 pitch 0.1" header, you can use 64pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
Din rail mountable - for DIN C45 width 35 / 32 / 15mm rails, Din mount case can be taken apart for panel mount use.
Wire range: 26-16AWG. Rated voltage: 60V. Rated current: 1A / per pin. Operating temperature: -20 to 50 Celsius.
The screw connectors make attaching and removing wires easily. Really helpful in your DIY prototyping project.
Widely Applications: It is well-suited for interfacing with I/O cards, data acquisition (DAQ) equipment, and any other device that uses a 2x32 64-position header connector. Applications include the Raspberry Pi A+, B+, 2B, and 3B boards, all of which use a 0.1" pitch 2x32 I/O pin header for their GPIO expansion ports.
Jienk 10Pcs 3-Pin 300V 8A 15EDGRK 3.81mm Pitch Screw Terminal Block Connector for 28-16AWG
SAR 45
Jienk 5Pcs 5-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG
SAR 42
10PCS 1/2 Inch Tube OD Pneumatic Cap Plug Fitting, PPF-1/2 Plastic Push-in Connect Fitting
SAR 47
Jienk 10Pcs Bulkhead Union 1/4" x 1/4" Tube OD Push to Connect Tube Fitting, PMM-1/4 Pneumatic Quick Connect Air Fitting
SAR 79
