Search

Search

Home / AITIAO / Sensors
4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded) in Saudi Arabia 4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded) in Saudi Arabia 4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded) in Saudi Arabia 4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded) in Saudi Arabia 4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded) in Saudi Arabia 4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded) in Saudi Arabia

4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded)

Sorry, this product is not available
Brand
AITIAO
Category
Sensors

Special Features

  • The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ± 16g.
  • The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °
  • Advantages: Save time and effort with Pre-Soldered GY-291 ADXL345 module. No need to learn how to solder or buy soldering equipment.
  • Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
  • Applications: The ADXL345 module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.

Description

Specifications:
Communication: SPI (3- and 4-wire) and I2C digital interfaces
Power supply voltage: 3.3V - 5V
Measurement range: ±2g, ±4g, ±8g, or ±16g
Current consumption: 40uA (low power mode), 150uA (normal mode), 320uA (high resolution mode)
Compatible with Klipper: Yes, no modification or soldering needed
Temperature Range Operates: over a wide temperature range (-40°C to +85°C) and is RoHS compliant
Dimensions: 2.8 x 1.4 x 1cm(1.1” x 0.55" x 0.4”)

Applications:
ADXL345 is a small, low-power accelerometer sensor that is commonly used in electronic devices such as smartphones and wearable technology to detect motion, orientation, and gestures.
It can measure acceleration in three dimensions (X, Y, and Z) and is also used in scientific and industrial applications like vibration analysis and motion detection.

Pins:
GND: This pin is used for ground.
VCC: This pin is used for supply voltage.
CS: This is the chip select pin, which is used to enable communication between the sensor and the microcontroller.
INT1 and INT2: These pins are used to signal interrupts to the microcontroller.
SDO: This pin is for SPI mode.
SCL: This pin is used for clock pulse for I2C communication.
SDA: This pin is used for transferring data through I2C communication.

Package inlcuded:
4 X GY-291 ADXL345 3-axis digital acceleration sensor module

Related Items