Material - The spur rack is made of 45# steel, which has high hardness, strength, and strong deformation resistance, it is more durable, longer lasting, and easier to process, install, and debug.
Feature - Racks are used to convert rotary motion into linear motion. The straight teeth of the rack are cut into one face of the square or circular section of the rod and fit with the pinion, which has the characteristics of mechanical simplicity, high load-carrying capacity, and unlimited length.
Application - Spur racks are paired with spur gears and are suitable for lifting mechanisms (vertical movement), horizontal movement, positioning mechanisms, stopping and allowing simultaneous rotation of multiple axes in industrial machinery.
Note - Only gears of the same type can be used with racks. For example, a 1M rack can be used with all 1M gears.
HARFINGTON Worm Gear Set Brass 0.5 Modulus 20T 20:1 Reduction Rate 3mm Hole Diameter Right Rotate Drive Gear Box Wheel Shaft Kits
SAR 93
HARFINGTON 1.0 Modulus 15 Teeth 5mm Inner Hole Tapered Bevel Gear 1:1 Plastic Miter Gear with M5 Fixing Hole and 2pcs M5 Set Screws
SAR 59
HARFINGTON 2pcs Bevel Gear 1M 20 Teeth 14mm Shaft Hole 1:1 Tapered Bevel Pinion Gear 45# Steel 1.5 Module 90 Degree Steering Gear, for Hardware Mechanical Rotation
SAR 66
2pcs Bevel Gear 2M 20 Teeth 10mm Shaft Hole 1:1 Tapered Pinion Gear with 4mm Keyway 45# Steel 2 Module 90 Degree Steering Gear with M5 Fixing Hole, for Hardware Mechanical Rotation
SAR 89
