PLA 3D Printer Filament 1.75 mm,Matte Filament,Multicolor Filament,Macaron Filament, Accuracy +/- 0.05 mm net Weight 1 kg for Ender3 Cr10

Pla matte filament,pla multicolor,macaron filament,white base multicolor,red,orange,yellow,green,blue,purple ,tough filament, better suitable for decoration and crafts,and much better to print applied.
PLA filament 1.75mm, net weight 1kg,vacuum packaging and silica desiccant included,Production quality control, triple filament diameter feedback mechanism processure, reduce the filament diameter may exceed the standard down to 1 in 10,000.
3D Printing 3d printer tips in Cura: recommend heat bed 50-60°C, nozzle: 195-220°C, speed 25-65mm/s,rectration length 3-5mm,rectration speed 40-50mm/s,support flow 70%,support Z top distance 0.6mm.
Better flow ,premium 1.75mm PLA filament，wide process temp,consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package with zipper Bag, net weight 1KG/Spool,100% satisfy warranty: within 24 hours reply.
In order to avoid tangle, be sure to fix the filament end somewhere or in the hole of the spool after 3D printing, and if you accidentally miss the filament end when you inject it to extruder , rewind the filament out to check if the tangle occurs.
Over 10 years experience in filament produce, satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you.

Hello,