How To Use This Watch Case Opener Tool Kit?
Step 1:
Unscrew the four white posts of the watch case holder，turn the black knob and make it fit snugly around the watch face plate
Step 2:
Put the back of your watch into the watch case holder. Open the pins of the holder wider than the size of the watch case,
put the watch in the holder and tighten the holder until it holds the watch case securely
Step 3:
Roll the adjustment wheel of the watch case opener to set the jaw spacing to fit your watch's back case grooves
Step 4:
When the tips are in securely in place in the watch case opener notches, grip the watch case holder to keep it from moving
and begin turning the blue watch case opener counter clockwise to open the watch case

Warm Tips:
① Please do not excessive tighten the watch case holder,otherwise it will damage the watch
② Be sure to check around for an o-ring gasket that will fit your water-resistant watch.
Be very careful to inspect how the old ring fits when you remove and replace the rubber ring to avoid damaging this delicate part

What's Advantage Of Our Watch Case Opener Tool Kit?
①This watch repair tool set do make it much easier to take the backs off of your watches to change the batteries
② The watch repair tool kit is comfortable to hold, easy to use and convenient to carry
③ This watch repair tool set contains all the parts you might need: watch holder,watch case opener, opener knife, tweezer, screwdrivers, cleaning cloth
④ The tweezer is a good helper when you need to catch the tiny parts

What Will You Get?
1 * Blue Watch Case Opener
1 * Watch Case Holder
1 * Cleaning Cloth
1* Tweezer
3 * Screwdrivers
5 * Watch case opening pry knife
If you have any quality problems with the received products, please contact us, we will definitely give you a satisfactory answer