This Top Load Washer Water Inlet Valve opens to allow water to enter the washing machine. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. If your washer won't stop filling with water, won't produce cold or hot water, won't fill at all, or is leaking, replacing the inlet valve may alleviate these issues.This inlet valve has 4 terminals and is located at the back of the machine. To access the part, you'll need to separate the washer cabinet from the washer and disconnect the red and white wiring connectors from the old part. Recommended Item: Washer Fill Hose (item 8212487RP). Package of two 5' industrial braid hoses with pre-installed washers and straight ends. We recommend replacing washing machine inlet hoses after 5 years of use to reduce the risk of hose failure. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.