Usage:
(1) Clean the stoma with warm water, dry the surrounding skin well, and keep the skin clean and dry.
(2) Use the stoma ruler to measure the size of the stoma.
(3) According to the measured shape and size of the stoma, cut the appropriate size of the hole in the pocket film. The diameter of the hole is approx. 2 mm larger than the stoma diameter.
(4) Peel off the protective paper from the foil.
(5) When installing the bag, first blow a little air into the bag in case the bag film is sticking, then adjust the cut hole and cover the stoma, first light pressure colostomy near the skin, then slowly into the surrounding pressure make film against the skin, then slowly pull the film against the skin in the surrounding pressure, hold the film by hand for a few minutes when the temperature is low, pressure and temperature of the hand can make the film paste more stable.
(6) The plastic buckle on the bag body is aligned with the buckle on the film and the pressure is gradually connected from the bottom up. After obviously feeling that each point is clamped, gently pull on the body to check that the buckle is tight.
(7) When a third to half of the bag body is full, remove the bag body, squeeze the wing of skin on the connecting ring, separate the buckle ring from top to bottom, and slowly remove the bag body.
(8) When peeling off the film, hold the skin around the film with one hand and slowly tear the film off with the other hand. If the film paste is too firm, do not pull with force to avoid skin damage, you can use warm water or skin cleanser to remove varnish.

Package list:
10 x colostomy bags
Measure 1 x ruler card